The 8869-RF cable, pipe, and fault locator offers three active frequencies -- 815 Hz, 8 kHz, and 82 kHz -- ensuring adequate signal is applied to buried utilities in any environment. Multiple active frequencies allow the user to accurately locate with a minimum of "ghosting" to adjacent lines while maintaining the ability continue locating past faults and poor utility conductors. Passive frequencies identify "live" and charged lines by their naturally occurring electromagnetic fields. The 8869-RF offers two passive frequencies -- 50/60 cycles and RF (radio frequency) -- allowing line locating without the use of a transmitter.

Transmitter functions include improved transmitter induction and automatic impedance matching when using direct connection. All functions are accessed via weather-proof membrane buttons and both user input and transmitter status are verified with audible responses. Whether using direct connection, induction mode, or coupler induction the 8869-RF is ideal for all three methods of signal application.

The ergonomically designed and balanced 8869-RF receiver provides instant push-button depth up to 15 feet and current measurement to identify the target utility in crowded easements. Audible proximity cues to the tracing signal are given to the user through either peak or null tones while the backlit digital display provides both relative and actual signal strength.

The 8869 can quickly and simply locate line faults when used with the optional "A-frame" GRP (ground return probe). As the operator moves towards the fault the receiver will respond with rapidly peaking signal. When the "A-frame" is placed directly over the fault, the receiver will provide a null response.

Conduit pinches can be located using the optional Sonde accessory. Operating on active frequencies of 815 Hz and 8 kHz, Rycom Instruments® Sondes are pushed into non-pressurized conduits and pipes until they reach the point of pinch or blockage. Traceable 20 feet in the air and 10 feet in cast iron, the 8869-RF receiver will identify the precise location of the line blockage.

Transmitter:

Tone Frequency: 82 kHz, 8 kHz, 815 Hz

Hook-Up Connection: Direct Connection, Transmitter Inductive Coupling, Coupled Induction

Load Matching: Automatic from 5 ohms to 2000 ohms

Output Power:   Frequency         Normal              High   

                             815 Hz                 .5W                 1.0W

                              8 kHz                   .5W                 1.0W

                              82 kHz                 .5W                 1.0W

Max Open Circuit Voltage: 30 V PK-PK AC

Operating Temperature: -4°F to +133°F (-20°C to +55°C)

Power Source: 8 "C" Batteries

Battery Life:  Greater than 36 Hours

Size: Transmitter 8.5" x 5.8" x2.5" (21cm x 15cm x 6cm)

Weight: 2.2 lbs. (1 kg)

Receiver:

Operating Frequency: 82 kHz, 8 kHz 815 Hz, 50/60 Hz, RF

Antenna Mode: Peak, Pin-Point Peak, and Null

Display Indicators: Backlift LCD Bar Graph, Low Battery, Signal Strength, Mode and Function Indications

Audio Indication: Variable Pitch Response

Current Measurement: Display Indicates Relative Current

Power Source: Disposable: 6 "C" Batteries

Battery Life: Continuous: 40 Hours. Intermittent: 82 Hours.

Signal Strength: LCD Bar Graph, Absolute Signal Strength Readout

Gain Control: Up/Down for Automatic Centering and Manual

Dynamic Range: 126 dB

Depth Measurement: Push-Button Readout to 15 feet or Manual Triangulation Method

Operating Temperature: -4°F to +133°F (-20°C to +55°C)

Size: 30.3" x 9.4" (77cm x 24cm)

Weight: 3 lbs (1.36 kg)

E-mail a friend about this item.