Rycom 8869 Cable, Pipe, Line and Fault Locator

$0.00 in your cart

		Rycom 8869 Cable, Pipe, Line and Fault Locator Price: $2,195.00 Quantity:
The ergonomically designed and balanced 8869 receiver provides instant push-button depth up to 15 feet and current measurement to identify the target utility in crowded easements. Audible proximity cues to the tracing signal are given to the user through either peak or null tones while the backlit digital display provides both relative and actual signal strength. The 8869 can quickly and simply locate line faults when used with the optional "A-frame" GRP (ground return probe). As the operator moves towards the fault the receiver will respond with rapidly peaking signal. When the "A-frame" is placed directly over the fault, the receiver will provide a null response. Conduit pinches can be located using the optional Sonde accessory. Operating on active frequencies of 815 Hz and 8 kHz, Rycom Instruments® Sondes are pushed into non-pressurized conduits and pipes until they reach the point of pinch or blockage. Traceable 20 feet in the air and 10 feet in cast iron, the 8869 receiver will identify the precise location of the line blockage. Transmitter: Tone Frequency: 82 kHz, 8 kHz, 815 Hz Hook-Up Connection: Direct Connection, Transmitter Inductive Coupling, Coupled Induction Load Matching: Automatic from 5 ohms to 2000 ohms Output Power: Frequency Normal High 815 Hz .5W 1.0W 8 kHz .5W 1.0W 82 kHz .5W 1.0W Max Open Circuit Voltage: 30 V PK-PK AC Operating Temperature: -4°F to +133°F (-20°C to +55°C) Power Source: 8 "C" Batteries Battery Life: Greater than 36 Hours Size: Transmitter 8.5" x 5.8" x2.5" (21cm x 15cm x 6cm) Weight: 2.2 lbs. (1 kg) Receiver: Operating Frequency: 82 kHz, 8 kHz 815 Hz, 50/60 Hz Antenna Mode: Peak, Pin-Point Peak, and Null Display Indicators: Backlift LCD Bar Graph, Low Battery, Signal Strength, Mode and Function Indications Audio Indication: Variable Pitch Response Current Measurement: Display Indicates Relative Current Power Source: Disposable: 6 "C" Batteries Battery Life: Continuous: 40 Hours. Intermittent: 82 Hours. Signal Strength: LCD Bar Graph, Absolute Signal Strength Readout Gain Control: Up/Down for Automatic Centering and Manual Dynamic Range: 126 dB Depth Measurement: Push-Button Readout to 15 feet or Manual Triangulation Method Operating Temperature: -4°F to +133°F (-20°C to +55°C) Size: 30.3" x 9.4" (77cm x 24cm) Weight: 3 lbs (1.36 kg) Call Today to Check for Availability! Ask for Corrine at 480-964-1871 or Toll Free at 1-(877)-964-1871! MADE IN THE U.S.A. E-mail a friend about this item. Continue shopping

Commerce enabled by ProStores